UNIVERSAL OIL APPLICATION INSTRUCTIONS
Vinnie's Oil UNI is our all-round oil that consists of several cold-pressed oils and waxes that do not slightly colors the wood, but only gives a beautiful luster. Used advantageously on light tree species where you don't want the "yellowing" effect on for example birch wood. Use it as mono-coat for less exposed surfaces, or preferable as maintenance oil for an already treated surface. It prevents the wood from drying and cracking. If you only use UNI on a wooden surface, then it is recommended to heat on the first layer so that it better penetrates the wood. Second layer should be laid cold. Non- polymerizing (if you want a polymerizing product, use UPO)
1. Sanding: Sand the wood until a smooth surface. You can sand it up to 600grit. The finer you sand, the more time it needs to soak before you polish. Pop the grains by spraying with water. If you sand to 240grit, you should add water to the wood after 180grit for example, wait until its dry, and sand with 240grit after.
2. Mix Vinnie's Oil UNI thoroughly and apply so that the entire surface is sticky. Thin layers. Rub it into the wood.
3. Wait for AT LEAST 2 hours. And wipe off. Polish. The finer you sand, the more time it needs to soak into the wood.
4. Repeat 2 – 3 layers. 1 -2 layers if used as maintenance. Wait for at least 3 days before use.